duress alarm
duress alarmduress alarm by CISCOR providing security solutions driven with the powerful DEVI 9000 software engine.
duress alarm: duress alarm
There is a lot of recent interest in duress alarm.
This website has information about duress alarm...
If you are still interested in duress alarm, please click on our link above.
Duress alarm systems are sometimes referred to as a panic button or wireless duress alarm or wireless panic button. Panic buttons for duress alarm systems can be worn as a belt clip, with a neck lanyard or with a wrist band. Smaller system are available for commercial applications that do not use a computer but they will be limited in the number of duress alarm panic buttons they can accommodate and also in the methods of alarm annunciation that are available. In residential applications, persons at risk from falls or other medical problems can benefit from using a duress alarm or panic button to signal for help. The use of spread spectrum frequency hopping radio transmission technology is ideally suited for wireless panic buttons and duress alarm systems. Duress alarm system can provide notification in a variety of ways. Any panic button used for duress alarm system purposes should be fully supervised because lives depend on the proper functioning of the device. Duress alarms can then be displayed on a monitor and a variety of other actions can be taken. The belt clip us normally used for employee and staff duress alarm systems. A neck lanyard or wrist band is often used for the elderly and for medical alert. Larger systems will have a computer, usually a PC, that intercepts and processes alarms. A double button is usually employed in hold-up applications such as a convenience store to avoid false alarms from accidental bumping of the pendant. Pressing both buttons is required to activate the alarm. The alarm transmissions are spread over a wide band by hopping around in different frequencies. Panic buttons are available in a variety of configurations. Wireless pendant transmitters will send a periodic check-in signal to the main computer or processor. If the signal is not received according to a definable time window, a supervisory alert will be generated. They may have a single panic button, double button or even three or four buttons. In commercial applications there is often a need to protect employees and staff from assault or other hazards including environmental concerns. A judge might use a multiple pendant to signal that a situation is tense and that security personnel should "stand by" or to signal that security personnel should respond directly and immediately. The central computer can make an announcement over facility hand held radios, pagers or telephones so that the proper security personnel are notified. This technology was first developed by the military to eliminate jamming of vital radio communications. Also, it is important that any wireless device report a low battery condition well in advance to the failure of the battery. If there is interference at one frequency the signal will still get through on other frequencies. A multiple button pendant can be used to signal varying levels of need. This level of dependability is not possible with narrow band single frequency systems.
duress alarm