alarm dialer
alarm dialeralarm dialer by CISCOR providing security solutions driven with the powerful DEVI 9000 software engine.
alarm dialer: alarm dialer
There is a lot of recent interest in alarm dialer.
This website has information about alarm dialer...
If you are still interested in alarm dialer, please click on our link above.
Duress alarm systems are sometimes referred to as a panic button or wireless duress alarm or wireless panic button. Panic buttons for duress alarm systems can be worn as a belt clip, with a neck lanyard or with a wrist band. The belt clip us normally used for employee and staff duress alarm systems. A neck lanyard or wrist band is often used for the elderly and for medical alert. The alarm transmissions are spread over a wide band by hopping around in different frequencies. Smaller system are available for commercial applications that do not use a computer but they will be limited in the number of duress alarm panic buttons they can accommodate and also in the methods of alarm annunciation that are available. Larger systems will have a computer, usually a PC, that intercepts and processes alarms. The use of spread spectrum frequency hopping radio transmission technology is ideally suited for wireless panic buttons and duress alarm systems. In residential applications, persons at risk from falls or other medical problems can benefit from using a duress alarm or panic button to signal for help. Pressing both buttons is required to activate the alarm. Duress alarms can then be displayed on a monitor and a variety of other actions can be taken. Any panic button used for duress alarm system purposes should be fully supervised because lives depend on the proper functioning of the device. A double button is usually employed in hold-up applications such as a convenience store to avoid false alarms from accidental bumping of the pendant. Duress alarm system can provide notification in a variety of ways. Panic buttons are available in a variety of configurations. A multiple button pendant can be used to signal varying levels of need. Wireless pendant transmitters will send a periodic check-in signal to the main computer or processor. If the signal is not received according to a definable time window, a supervisory alert will be generated. If there is interference at one frequency the signal will still get through on other frequencies. Now this is available for us to use as well. The central computer can make an announcement over facility hand held radios, pagers or telephones so that the proper security personnel are notified. This level of dependability is not possible with narrow band single frequency systems. This technology was first developed by the military to eliminate jamming of vital radio communications. A judge might use a multiple pendant to signal that a situation is tense and that security personnel should "stand by" or to signal that security personnel should respond directly and immediately. Also, it is important that any wireless device report a low battery condition well in advance to the failure of the battery. They may have a single panic button, double button or even three or four buttons.
alarm dialer